Trailers, Truck Bodies & Specialty Vehicles worked example

Option Package Cost at 58% installed-content capture factor: a worked example

Suppose installed-content capture factor falls to 58%. This page works the full calculation at that level so you can see exactly which result moves and by how much. Option Package Cost prices out an upfit or option bundle — toolboxes, liftgates, lighting, interior kits — across a run of trailers or specialty vehicles, blending per-vehicle content with fixed engineering and tooling.

The inputs for this scenario

  • Vehicles receiving the option package: 100 units (held at the documented default)
  • Option package cost per vehicle: 45 $ / unit (held at the documented default)
  • Installed-content capture factor: 58 % (the input this scenario stresses; the baseline uses 80)
  • Fixed engineering and tooling cost: 250 $ (held at the documented default)

Working through the calculation

  • The calculation starts from the formula this tool documents: Option Package Cost cost = quantity × rate × capture factor + fixed cost.
  • Weighted cost works out to 2,860 $ at these inputs, and this is the headline figure for the scenario.
  • Per piece value works out to 28.6 $ / piece at these inputs.
  • Captured value works out to 2,610 $ at these inputs.
  • Fixed adjustment works out to 250 $ at these inputs.

How this compares with the baseline

  • Against the tool's baseline example, where installed-content capture factor sits at 80% and the headline result is 3,850 $, this scenario comes in 25.71% below the baseline at 2,860 $.
  • It computes total option package cost as vehicle count times per-vehicle content times capture factor plus fixed cost, then divides by count for a per-vehicle figure. When the numbers land here, the stressed input is the lever to work; the walkthrough above shows exactly how much each output recovers as it climbs back toward the baseline.

Results at a glance

  • Weighted cost: 2,860 $ (headline result)
  • Per piece value: 28.6 $ / piece
  • Captured value: 2,610 $
  • Fixed adjustment: 250 $

Run it with your numbers

  • To rerun this with your own numbers, open the live Option Package Cost calculator, set installed-content capture factor to your actual value, and adjust the remaining inputs to match your operation.

Last reviewed 2026-05-12.