Training, Certification & Skills Compliance worked example

Skills Redundancy Score with severity if the only qualified operator is unavailable of 3 score: a worked example

This worked example runs the skills redundancy score numbers for a tougher week than the baseline: severity if the only qualified operator is unavailable of 3 score instead of the typical 6 score. Estimate skills redundancy for training, certification and skills compliance using production-ready inputs so teams can rank risks and decide which issue needs containment, controls, or escalation first.

The inputs for this scenario

  • Severity if the only qualified operator is unavailable: 3 score (the input this scenario stresses; the baseline uses 6)
  • Likelihood that single point of skill fails or leaves: 4 score (held at the documented default)
  • Chance a coverage gap is spotted before it stops the line: 3 score (held at the documented default)

Working through the calculation

  • The calculation starts from the formula this tool documents: Skills redundancy risk score = skills redundancy severity score × skills redundancy occurrence score × skills redundancy detection score.
  • Skills redundancy risk score works out to 3.35 score at these inputs, and this is the headline figure for the scenario.
  • Skills redundancy severity score works out to 3 score at these inputs.
  • Skills redundancy occurrence score works out to 4 score at these inputs.
  • Skills redundancy detection score works out to 3 score at these inputs.

How this compares with the baseline

  • Against the tool's baseline example, where severity if the only qualified operator is unavailable sits at 6 score and the headline result is 4.55 score, this scenario comes in 26.37% below the baseline at 3.35 score.
  • Use it when planning cross-training, reviewing a skills matrix, or assessing continuity risk before vacation season or a known departure. A result at this level usually justifies acting on the stressed input before touching anything else, because every other figure in the table is downstream of it.

Results at a glance

  • Skills redundancy risk score: 3.35 score (headline result)
  • Skills redundancy severity score: 3 score
  • Skills redundancy occurrence score: 4 score
  • Skills redundancy detection score: 3 score

Run it with your numbers

  • To rerun this with your own numbers, open the live Skills Redundancy Score calculator, set severity if the only qualified operator is unavailable to your actual value, and adjust the remaining inputs to match your operation.

Last reviewed 2026-05-12.