Transportation, Freight & Distribution worked example

Truckload Utilization at 65% target load utilization goal: a worked example

Suppose target load utilization goal falls to 65%. This page works the full calculation at that level so you can see exactly which result moves and by how much. Measure how much trailer weight, pallet positions, or cube was used versus available truckload capacity and show the gap to the utilization target.

The inputs for this scenario

  • Trailer capacity actually used: 22 capacity units (held at the documented default)
  • Total trailer capacity available: 26 capacity units (held at the documented default)
  • Target load utilization goal: 65 % (the input this scenario stresses; the baseline uses 90)

Working through the calculation

  • The calculation starts from the formula this tool documents: Truckload Utilization rate = used trailer capacity ÷ available trailer capacity × 100.
  • Truckload Utilization rate works out to 84.62 % of trailer capacity at these inputs, and this is the headline figure for the scenario.
  • Gap to target works out to -19.62 points at these inputs.
  • Used trailer capacity works out to 22 capacity units at these inputs.
  • Available trailer capacity works out to 26 capacity units at these inputs.

How this compares with the baseline

  • Against the tool's baseline example, where target load utilization goal sits at 90% and the headline result is 84.62 % of trailer capacity, this scenario lands almost exactly on the baseline at 84.62 % of trailer capacity.
  • It computes the percentage of trailer capacity used and the point gap between that and your utilization target. When the numbers land here, the stressed input is the lever to work; the walkthrough above shows exactly how much each output recovers as it climbs back toward the baseline.

Results at a glance

  • Truckload Utilization rate: 84.62 % of trailer capacity (headline result)
  • Gap to target: -19.62 points
  • Used trailer capacity: 22 capacity units
  • Available trailer capacity: 26 capacity units

Run it with your numbers

  • To rerun this with your own numbers, open the live Truckload Utilization calculator, set target load utilization goal to your actual value, and adjust the remaining inputs to match your operation.

Last reviewed 2026-05-12.