Veterinary Device & Animal Health Products worked example

Inventory Coverage with daily unit demand for the sku of 600 units / day: a worked example in veterinary device & animal health products

Suppose daily unit demand for the sku falls to 600 units / day. This page works the full calculation at that level so you can see exactly which result moves and by how much. Estimate inventory coverage for veterinary device and animal health products using production-ready inputs so teams can plan replenishment and safety stock using actual usage and lead time.

The inputs for this scenario

  • Daily unit demand for the SKU: 600 units / day (the input this scenario stresses; the baseline uses 1,200)
  • Purchase-order lead time: 85 days (held at the documented default)
  • Safety stock coverage factor: 1.1 units (held at the documented default)

Working through the calculation

  • The calculation starts from the formula this tool documents: Inventory coverage cycle stock = inventory coverage daily usage × inventory coverage lead time.
  • Protected days of supply works out to 6.42 days at these inputs, and this is the headline figure for the scenario.
  • Unprotected days works out to 7.06 days at these inputs.
  • Inventory works out to 600 pieces at these inputs.
  • Daily usage works out to 85 pieces / day at these inputs.

How this compares with the baseline

  • Against the tool's baseline example, where daily unit demand for the sku sits at 1,200 units / day and the headline result is 12.83 days, this scenario comes in 50% below the baseline at 6.42 days.
  • It computes protected days of supply by combining cycle stock (demand times lead time) with a safety-stock coverage factor. When the numbers land here, the stressed input is the lever to work; the walkthrough above shows exactly how much each output recovers as it climbs back toward the baseline.

Results at a glance

  • Protected days of supply: 6.42 days (headline result)
  • Unprotected days: 7.06 days
  • Inventory: 600 pieces
  • Daily usage: 85 pieces / day

Run it with your numbers

  • To rerun this with your own numbers, open the live Inventory Coverage calculator, set daily unit demand for the sku to your actual value, and adjust the remaining inputs to match your operation.

Last reviewed 2026-05-12.