Wire, Cable & Conductor Manufacturing worked example

Packaging Cost at 92% share of reels needing full protective packaging: a worked example in wire, cable & conductor manufacturing

What does the result look like when share of reels needing full protective packaging reaches 92%? The full calculation is worked below with real intermediate numbers. Use it when packaging cost in wire, cable and conductor manufacturing is being put through a wire, cable and conductor manufacturing weighted-cost review.

The inputs for this scenario

  • Reels or coils packaged in the run: 100 units (unchanged)
  • Packaging material + labor cost per reel: 45 $ / unit (unchanged)
  • Share of reels needing full protective packaging: 92 % (raised for this scenario; the documented default is 80)
  • Fixed packaging line setup cost: 250 $ (unchanged)

Working through the calculation

  • Applying the documented formula (Packaging Cost cost = quantity × rate × capture factor + fixed cost) to the inputs above produces each figure below.
  • At this operating point the engine returns 4,390 $ for weighted cost, the number this scenario is built around.
  • At this operating point the engine returns 43.9 $ / piece for per piece value.
  • At this operating point the engine returns 4,140 $ for captured value.
  • At this operating point the engine returns 250 $ for fixed adjustment.

How this compares with the baseline

  • Against the tool's baseline example, where share of reels needing full protective packaging sits at 80% and the headline result is 3,850 $, this scenario comes in 14.03% above the baseline at 4,390 $.
  • A figure at this level is achievable when share of reels needing full protective packaging is genuinely sustained, not just peaked for a shift. The capture factor treats packaging intensity as a single blended percentage; if you mix bare coils and heavily crated reels in one order, split them into separate runs for accuracy.

Results at a glance

  • Weighted cost: 4,390 $ (headline result)
  • Per piece value: 43.9 $ / piece
  • Captured value: 4,140 $
  • Fixed adjustment: 250 $

Run it with your numbers

  • Every input above is editable in the live Packaging Cost calculator, which recalculates instantly and can be shared with the inputs intact.

Last reviewed 2026-05-12.