WMS, Warehouse Labor & Fulfillment worked example

Pick Accuracy at 68% target pick accuracy rate: a worked example

This worked example runs the pick accuracy numbers for a tougher week than the baseline: 68% target pick accuracy rate instead of the typical 95%. Estimate pick accuracy for wms, warehouse labor and fulfillment using production-ready inputs so teams can track KPI performance and decide whether corrective action is needed.

The inputs for this scenario

  • Accurate Picks Verified: 8 count (held at the documented default)
  • Total Picks Audited: 250 count (held at the documented default)
  • Target Pick Accuracy Rate: 68 % (the input this scenario stresses; the baseline uses 95)

Working through the calculation

  • The calculation starts from the formula this tool documents: Pick accuracy rate = pick accuracy count ÷ total pick accuracy population × 100.
  • Pick accuracy rate works out to 3.2 % at these inputs, and this is the headline figure for the scenario.
  • Pick accuracy gap to target works out to 64.8 points at these inputs.
  • Pick accuracy count works out to 8 count at these inputs.
  • Total pick accuracy population works out to 250 count at these inputs.

How this compares with the baseline

  • Against the tool's baseline example, where target pick accuracy rate sits at 95% and the headline result is 3.2 %, this scenario lands almost exactly on the baseline at 3.2 %.
  • Use it during quality audits, root-cause reviews after a spike in returns, or when validating a new scanning or verification process. A result at this level usually justifies acting on the stressed input before touching anything else, because every other figure in the table is downstream of it.

Results at a glance

  • Pick accuracy rate: 3.2 % (headline result)
  • Pick accuracy gap to target: 64.8 points
  • Pick accuracy count: 8 count
  • Total pick accuracy population: 250 count

Run it with your numbers

  • To rerun this with your own numbers, open the live Pick Accuracy calculator, set target pick accuracy rate to your actual value, and adjust the remaining inputs to match your operation.

Last reviewed 2026-05-12.