Wood & Paper Manufacturing worked example
Wood Scrap Value at 126% market price factor: a worked example
Push market price factor up to 126% and the picture changes. This example computes every intermediate figure at that operating point. Use it when wood scrap value in wood and paper manufacturing is being re-tuned and you want to land closer to target on the first try.
The inputs for this scenario
- Base Scrap Volume: 100 value (unchanged)
- Grade or Recovery Adjustment: 1.05 value (unchanged)
- Market Price Factor: 126 % (raised for this scenario; the documented default is 110)
Working through the calculation
- Applying the documented formula (Adjusted wood scrap value value = (baseline wood scrap value value + wood scrap value adjustment) × wood scrap value adjustment factor) to the inputs above produces each figure below.
- At this operating point the engine returns 105 units for adjusted wood scrap value value, the number this scenario is built around.
- At this operating point the engine returns -21.5 value for gap to target.
- At this operating point the engine returns 100 value for measured value.
- At this operating point the engine returns 1.05 x for correction factor.
How this compares with the baseline
- Against the tool's baseline example, where market price factor sits at 110% and the headline result is 105 units, this scenario lands almost exactly on the baseline at 105 units.
- It adds a grade or recovery adjustment to the base scrap volume and multiplies the sum by a market price factor to give an adjusted planning value. The value of this scenario is the size of the gap it exposes: that gap, priced out over a year, is the budget you can justify spending to close it.
Results at a glance
- Adjusted wood scrap value value: 105 units (headline result)
- Gap to target: -21.5 value
- Measured value: 100 value
- Correction factor: 1.05 x
Run it with your numbers
- Every input above is editable in the live Wood Scrap Value calculator, which recalculates instantly and can be shared with the inputs intact.
Last reviewed 2026-05-12.