Workforce, Labor Standards & Skills Planning worked example

Certification Renewal Workload at 1.38% utilization target for the certification team: a worked example in workforce, labor standards & skills planning

Push utilization target for the certification team up to 1.38% and the picture changes. This example computes every intermediate figure at that operating point. Use it when certification renewal workload in workforce, labor standards and skills planning is being sized against an asset rating.

The inputs for this scenario

  • Recertifications due in the period (demand): 100 units (unchanged)
  • Utilization target for the certification team: 1.38 % (raised for this scenario; the documented default is 1.2)
  • Available certification team capacity: 8 units (unchanged)

Working through the calculation

  • Applying the documented formula (Required certification renewal workload load = certification renewal workload demand รท certification renewal workload utilization target) to the inputs above produces each figure below.
  • At this operating point the engine returns 138 hr for total load, the number this scenario is built around.
  • At this operating point the engine returns 17.25 hr / hr for hourly equivalent.
  • At this operating point the engine returns 100 hr for input load.
  • At this operating point the engine returns 1.38 x for load factor.

How this compares with the baseline

  • Against the tool's baseline example, where utilization target for the certification team sits at 1.2% and the headline result is 120 hr, this scenario comes in 15% above the baseline at 138 hr.
  • It grosses raw recertification demand up by a utilization target to get required load, then subtracts available capacity to reveal the gap. The value of this scenario is the size of the gap it exposes: that gap, priced out over a year, is the budget you can justify spending to close it.

Results at a glance

  • Total load: 138 hr (headline result)
  • Hourly equivalent: 17.25 hr / hr
  • Input load: 100 hr
  • Load factor: 1.38 x

Run it with your numbers

  • Every input above is editable in the live Certification Renewal Workload calculator, which recalculates instantly and can be shared with the inputs intact.

Last reviewed 2026-05-12.