Advanced Technical Ceramics worked example

Technical Ceramic Supplier Risk with supply impact severity if it fails of 4.5 1-10: a worked example

This worked example runs the technical ceramic supplier risk numbers for a tougher week than the baseline: supply impact severity if it fails of 4.5 1-10 instead of the typical 9 1-10. Score supplier risk for ceramic powders, blanks, kiln furniture, or outsourced operations using supply impact, disruption likelihood, and detection difficulty.

The inputs for this scenario

  • Supply impact severity if it fails: 4.5 1-10 (the input this scenario stresses; the baseline uses 9)
  • Likelihood of supply disruption: 5 1-10 (held at the documented default)
  • Difficulty detecting or recovering: 7 1-10 (held at the documented default)

Working through the calculation

  • The calculation starts from the formula this tool documents: Technical ceramic supplier risk score = severity score × likelihood score × detection difficulty score.
  • Technical ceramic supplier risk score works out to 5.3 score at these inputs, and this is the headline figure for the scenario.
  • Supply impact severity works out to 4.5 1-10 at these inputs.
  • Disruption likelihood works out to 5 1-10 at these inputs.
  • Detection or recovery difficulty works out to 7 1-10 at these inputs.

How this compares with the baseline

  • Against the tool's baseline example, where supply impact severity if it fails sits at 9 1-10 and the headline result is 7.1 score, this scenario comes in 25.35% below the baseline at 5.3 score.
  • Use it during supplier qualification, annual sourcing reviews, or whenever a single-source ceramic input could halt production. A result at this level usually justifies acting on the stressed input before touching anything else, because every other figure in the table is downstream of it.

Results at a glance

  • Technical ceramic supplier risk score: 5.3 score (headline result)
  • Supply impact severity: 4.5 1-10
  • Disruption likelihood: 5 1-10
  • Detection or recovery difficulty: 7 1-10

Run it with your numbers

  • To rerun this with your own numbers, open the live Technical Ceramic Supplier Risk calculator, set supply impact severity if it fails to your actual value, and adjust the remaining inputs to match your operation.

Last reviewed 2026-05-12.