Appliances, HVAC & White Goods Manufacturing worked example

Cabinet Sheet Metal Yield Calculator at 99% target cabinet sheet metal yield: a worked example

What does the result look like when target cabinet sheet metal yield reaches 99%? The full calculation is worked below with real intermediate numbers. a manufacturing or quality engineer needs to measure sheet metal panel yield for appliance or HVAC cabinets

The inputs for this scenario

  • Usable cabinet panels: 9,650 panels (unchanged)
  • Total sheet metal panels processed: 10,000 panels (unchanged)
  • Target cabinet sheet metal yield: 99 % (raised for this scenario; the documented default is 98)

Working through the calculation

  • Applying the documented formula (Cabinet sheet metal yield = usable cabinet panels ÷ total sheet metal panels processed × 100) to the inputs above produces each figure below.
  • At this operating point the engine returns 96.5 % for cabinet sheet metal yield, the number this scenario is built around.
  • At this operating point the engine returns 2.5 points for yield gap to target.
  • At this operating point the engine returns 9,650 panels for usable cabinet panels.
  • At this operating point the engine returns 10,000 panels for total sheet metal panels processed.

How this compares with the baseline

  • Against the tool's baseline example, where target cabinet sheet metal yield sits at 98% and the headline result is 96.5 %, this scenario lands almost exactly on the baseline at 96.5 %.
  • A figure at this level is achievable when target cabinet sheet metal yield is genuinely sustained, not just peaked for a shift. It is a count-based yield and does not weight a scrapped door blank differently from a small bracket, so blend it with cost-weighted scrap data when defect mix varies.

Results at a glance

  • Cabinet sheet metal yield: 96.5 % (headline result)
  • Yield gap to target: 2.5 points
  • Usable cabinet panels: 9,650 panels
  • Total sheet metal panels processed: 10,000 panels

Run it with your numbers

  • Every input above is editable in the live Cabinet Sheet Metal Yield Calculator calculator, which recalculates instantly and can be shared with the inputs intact.

Last reviewed 2026-05-12.