Appliances, HVAC & White Goods Manufacturing worked example

Cabinet Sheet Metal Yield Calculator at 71% target cabinet sheet metal yield: a worked example

Here is what the math looks like when conditions slip. We hold every other input steady and drop target cabinet sheet metal yield to 71%, then walk the calculation through step by step. Calculate good cabinet sheet metal yield from usable panels, total panels processed, and the target yield.

The inputs for this scenario

  • Usable cabinet panels: 9,650 panels (held at the documented default)
  • Total sheet metal panels processed: 10,000 panels (held at the documented default)
  • Target cabinet sheet metal yield: 71 % (the input this scenario stresses; the baseline uses 98)

Working through the calculation

  • The calculation starts from the formula this tool documents: Cabinet sheet metal yield = usable cabinet panels ÷ total sheet metal panels processed × 100.
  • Cabinet sheet metal yield works out to 96.5 % at these inputs, and this is the headline figure for the scenario.
  • Yield gap to target works out to -25.5 points at these inputs.
  • Usable cabinet panels works out to 9,650 panels at these inputs.
  • Total sheet metal panels processed works out to 10,000 panels at these inputs.

How this compares with the baseline

  • Against the tool's baseline example, where target cabinet sheet metal yield sits at 98% and the headline result is 96.5 %, this scenario lands almost exactly on the baseline at 96.5 %.
  • The practical read: the gap between this scenario and the baseline is entirely attributable to target cabinet sheet metal yield, so recovering it is worth quantifying in dollars before considering equipment or staffing changes. It is a count-based yield and does not weight a scrapped door blank differently from a small bracket, so blend it with cost-weighted scrap data when defect mix varies.

Results at a glance

  • Cabinet sheet metal yield: 96.5 % (headline result)
  • Yield gap to target: -25.5 points
  • Usable cabinet panels: 9,650 panels
  • Total sheet metal panels processed: 10,000 panels

Run it with your numbers

  • To rerun this with your own numbers, open the live Cabinet Sheet Metal Yield Calculator calculator, set target cabinet sheet metal yield to your actual value, and adjust the remaining inputs to match your operation.

Last reviewed 2026-05-12.