Asphalt, Road Materials & Paving Products worked example

Asphalt Cost Per Ton at 72% cost share applied to this job: a worked example

Here is what the math looks like when conditions slip. We hold every other input steady and drop cost share applied to this job to 72%, then walk the calculation through step by step. Roll up asphalt material, production, trucking, and fixed costs into total job cost and cost per ton.

The inputs for this scenario

  • Asphalt mix tonnage for the job: 1,250 tons (held at the documented default)
  • Variable asphalt cost per ton (mix + trucking): 82 $ / ton (held at the documented default)
  • Cost share applied to this job: 72 % (the input this scenario stresses; the baseline uses 100)
  • Fixed mobilization and plant setup cost: 4,500 $ (held at the documented default)

Working through the calculation

  • The calculation starts from the formula this tool documents: Variable asphalt cost = asphalt mix tonnage × variable asphalt cost × cost share applied to job.
  • Total asphalt job cost works out to 78,300 $ at these inputs, and this is the headline figure for the scenario.
  • Cost per asphalt ton works out to 62.64 $ / ton at these inputs.
  • Variable asphalt cost works out to 73,800 $ at these inputs.
  • Fixed paving or plant cost works out to 4,500 $ at these inputs.

How this compares with the baseline

  • Against the tool's baseline example, where cost share applied to this job sits at 100% and the headline result is 107,000 $, this scenario comes in 26.82% below the baseline at 78,300 $.
  • The practical read: the gap between this scenario and the baseline is entirely attributable to cost share applied to this job, so recovering it is worth quantifying in dollars before considering equipment or staffing changes. It assumes one blended variable rate; if your mix grade, polymer content or haul distance changes mid-job, run separate calculations per segment because a single average will misstate cost on mixed-spec work.

Results at a glance

  • Total asphalt job cost: 78,300 $ (headline result)
  • Cost per asphalt ton: 62.64 $ / ton
  • Variable asphalt cost: 73,800 $
  • Fixed paving or plant cost: 4,500 $

Run it with your numbers

  • To rerun this with your own numbers, open the live Asphalt Cost Per Ton calculator, set cost share applied to this job to your actual value, and adjust the remaining inputs to match your operation.

Last reviewed 2026-05-12.