Fixture, Gauge & Workholding Management worked example

Fixture Quote Cost at 110% quote scope included: a worked example

What does the result look like when quote scope included reaches 110%? The full calculation is worked below with real intermediate numbers. Use it when preparing a customer tooling quote, comparing supplier fixture quotes, or budgeting internal toolroom work.

The inputs for this scenario

  • Fixtures quoted: 10 fixtures (unchanged)
  • Quoted cost per fixture: 6,800 $ / fixture (unchanged)
  • Quote scope included: 110 % (raised for this scenario; the documented default is 100)
  • Fixed design, tryout, or project cost: 7,500 $ (unchanged)

Working through the calculation

  • Applying the documented formula (Variable fixture quote cost = fixtures quoted × quoted cost per fixture × quote scope included) to the inputs above produces each figure below.
  • At this operating point the engine returns 82,300 $ for total fixture quote cost, the number this scenario is built around.
  • At this operating point the engine returns 8,230 $ / piece for quoted fixture cost per unit.
  • At this operating point the engine returns 74,800 $ for variable fixture quote cost.
  • At this operating point the engine returns 7,500 $ for fixed design, tryout, or project cost.

How this compares with the baseline

  • Against the tool's baseline example, where quote scope included sits at 100% and the headline result is 75,500 $, this scenario comes in 9.01% above the baseline at 82,300 $.
  • A figure at this level is achievable when quote scope included is genuinely sustained, not just peaked for a shift. It assumes a single blended per-fixture cost; if your fixtures span widely different complexities, quote them in separate runs rather than averaging.

Results at a glance

  • Total fixture quote cost: 82,300 $ (headline result)
  • Quoted fixture cost per unit: 8,230 $ / piece
  • Variable fixture quote cost: 74,800 $
  • Fixed design, tryout, or project cost: 7,500 $

Run it with your numbers

  • Every input above is editable in the live Fixture Quote Cost calculator, which recalculates instantly and can be shared with the inputs intact.

Last reviewed 2026-05-12.