Furniture, Fixtures & Interior Products worked example

Wood Waste Cost at 110% share of waste charged to this job: a worked example

What does the result look like when share of waste charged to this job reaches 110%? The full calculation is worked below with real intermediate numbers. Use it when sheet yield, board footage, nesting, grain direction, veneer matching, remakes, and scrap bins affect material cost for furniture and fixture jobs.

The inputs for this scenario

  • Wood or panel waste generated: 145 bd ft (unchanged)
  • Wood material cost per board foot: 6.25 $ / bd ft (unchanged)
  • Share of waste charged to this job: 110 % (raised for this scenario; the documented default is 100)
  • Fixed waste handling cost: 125 $ (unchanged)

Working through the calculation

  • Applying the documented formula (Variable wood waste cost = wood or panel waste generated × wood material cost per unit × waste charged to this job) to the inputs above produces each figure below.
  • At this operating point the engine returns 1,122 $ for total wood waste cost, the number this scenario is built around.
  • At this operating point the engine returns 7.74 $ / piece for wood waste cost per material unit.
  • At this operating point the engine returns 997 $ for variable wood waste cost.
  • At this operating point the engine returns 125 $ for fixed waste handling cost.

How this compares with the baseline

  • Against the tool's baseline example, where share of waste charged to this job sits at 100% and the headline result is 1,031 $, this scenario comes in 8.79% above the baseline at 1,122 $.
  • A figure at this level is achievable when share of waste charged to this job is genuinely sustained, not just peaked for a shift. It values waste at full material cost and does not credit any revenue you recover from selling offcuts, briquetting dust for fuel, or reusing drops on smaller parts, so it represents gross waste cost, not net.

Results at a glance

  • Total wood waste cost: 1,122 $ (headline result)
  • Wood waste cost per material unit: 7.74 $ / piece
  • Variable wood waste cost: 997 $
  • Fixed waste handling cost: 125 $

Run it with your numbers

  • Every input above is editable in the live Wood Waste Cost calculator, which recalculates instantly and can be shared with the inputs intact.

Last reviewed 2026-05-12.