Gaming & Entertainment Hardware worked example

Field Failure Cost at 110% share of failure cost allocated to this model: a worked example in gaming & entertainment hardware

Push share of failure cost allocated to this model up to 110% and the picture changes. This example computes every intermediate figure at that operating point. Use it when failures such as controller drift, battery decline, fan noise, display flicker, audio dropout, LED failure, firmware lockup, power-supply faults, or cable damage create repair and replacement exposure.

The inputs for this scenario

  • Field failure claims received: 58 claims (unchanged)
  • Cost per field failure claim: 145 $ / claim (unchanged)
  • Share of failure cost allocated to this model: 110 % (raised for this scenario; the documented default is 100)
  • Fixed field containment cost: 6,200 $ (unchanged)

Working through the calculation

  • Applying the documented formula (Variable field failure cost = field failure claims or units × cost per field failure × failure cost allocated to this model) to the inputs above produces each figure below.
  • At this operating point the engine returns 15,451 $ for total field failure cost, the number this scenario is built around.
  • At this operating point the engine returns 266 $ / piece for field failure cost per claim.
  • At this operating point the engine returns 9,251 $ for variable field failure cost.
  • At this operating point the engine returns 6,200 $ for fixed field containment cost.

How this compares with the baseline

  • Against the tool's baseline example, where share of failure cost allocated to this model sits at 100% and the headline result is 14,610 $, this scenario comes in 5.76% above the baseline at 15,451 $.
  • It sums the variable cost of field failure claims (claims times cost per claim times the model's allocation share) with a fixed containment cost to give total field failure cost and cost per claim. The value of this scenario is the size of the gap it exposes: that gap, priced out over a year, is the budget you can justify spending to close it.

Results at a glance

  • Total field failure cost: 15,451 $ (headline result)
  • Field failure cost per claim: 266 $ / piece
  • Variable field failure cost: 9,251 $
  • Fixed field containment cost: 6,200 $

Run it with your numbers

  • Every input above is editable in the live Field Failure Cost calculator, which recalculates instantly and can be shared with the inputs intact.

Last reviewed 2026-05-12.