Gaming & Entertainment Hardware worked example

Field Failure Cost at 72% share of failure cost allocated to this model: a worked example in gaming & entertainment hardware

Here is what the math looks like when conditions slip. We hold every other input steady and drop share of failure cost allocated to this model to 72%, then walk the calculation through step by step. Estimate field failure cost for gaming and entertainment hardware after shipment, installation, arcade route operation, or customer use.

The inputs for this scenario

  • Field failure claims received: 58 claims (held at the documented default)
  • Cost per field failure claim: 145 $ / claim (held at the documented default)
  • Share of failure cost allocated to this model: 72 % (the input this scenario stresses; the baseline uses 100)
  • Fixed field containment cost: 6,200 $ (held at the documented default)

Working through the calculation

  • The calculation starts from the formula this tool documents: Variable field failure cost = field failure claims or units × cost per field failure × failure cost allocated to this model.
  • Total field failure cost works out to 12,255 $ at these inputs, and this is the headline figure for the scenario.
  • Field failure cost per claim works out to 211 $ / piece at these inputs.
  • Variable field failure cost works out to 6,055 $ at these inputs.
  • Fixed field containment cost works out to 6,200 $ at these inputs.

How this compares with the baseline

  • Against the tool's baseline example, where share of failure cost allocated to this model sits at 100% and the headline result is 14,610 $, this scenario comes in 16.12% below the baseline at 12,255 $.
  • The practical read: the gap between this scenario and the baseline is entirely attributable to share of failure cost allocated to this model, so recovering it is worth quantifying in dollars before considering equipment or staffing changes. It treats cost per claim as an average; a long-tail event like a safety recall or a few catastrophic claims can blow past the linear estimate.

Results at a glance

  • Total field failure cost: 12,255 $ (headline result)
  • Field failure cost per claim: 211 $ / piece
  • Variable field failure cost: 6,055 $
  • Fixed field containment cost: 6,200 $

Run it with your numbers

  • To rerun this with your own numbers, open the live Field Failure Cost calculator, set share of failure cost allocated to this model to your actual value, and adjust the remaining inputs to match your operation.

Last reviewed 2026-05-12.