Roofing, Siding & Exterior Building Products worked example

Freight Cube Utilization at 68% target cube-fill compliance rate: a worked example

Suppose target cube-fill compliance rate falls to 68%. This page works the full calculation at that level so you can see exactly which result moves and by how much. Estimate freight cube utilization for roofing, siding and exterior building products using production-ready inputs so teams can track KPI performance and decide whether corrective action is needed.

The inputs for this scenario

  • Loads meeting cube target (per period): 8 count (held at the documented default)
  • Total outbound loads shipped (per period): 250 count (held at the documented default)
  • Target cube-fill compliance rate: 68 % (the input this scenario stresses; the baseline uses 95)

Working through the calculation

  • The calculation starts from the formula this tool documents: Freight cube utilization rate = freight cube utilization count ÷ total freight cube utilization population × 100.
  • Freight cube utilization rate works out to 3.2 % at these inputs, and this is the headline figure for the scenario.
  • Freight cube utilization gap to target works out to 64.8 points at these inputs.
  • Freight cube utilization count works out to 8 count at these inputs.
  • Total freight cube utilization population works out to 250 count at these inputs.

How this compares with the baseline

  • Against the tool's baseline example, where target cube-fill compliance rate sits at 95% and the headline result is 3.2 %, this scenario lands almost exactly on the baseline at 3.2 %.
  • It computes the percentage of outbound loads that met your cube-fill target and the point gap between that rate and your goal. When the numbers land here, the stressed input is the lever to work; the walkthrough above shows exactly how much each output recovers as it climbs back toward the baseline.

Results at a glance

  • Freight cube utilization rate: 3.2 % (headline result)
  • Freight cube utilization gap to target: 64.8 points
  • Freight cube utilization count: 8 count
  • Total freight cube utilization population: 250 count

Run it with your numbers

  • To rerun this with your own numbers, open the live Freight Cube Utilization calculator, set target cube-fill compliance rate to your actual value, and adjust the remaining inputs to match your operation.

Last reviewed 2026-05-12.