Vending, Kiosk & Self-Service Equipment worked example

Touchscreen Calibration Time at 12% setup, retest, and handling allowance: a worked example

This scenario runs the touchscreen calibration time calculation on the strong side: 12% setup, retest, and handling allowance, with every other input held at its documented default. Use it when touchscreen calibration time in vending, kiosk and self-service equipment is changing rate or allowance and you want to see the impact.

The inputs for this scenario

  • Touchscreens to calibrate: 120 units (unchanged)
  • Calibration throughput per station: 12 units / min (unchanged)
  • Setup, retest, and handling allowance: 12 % (raised for this scenario; the documented default is 10)

Working through the calculation

  • Applying the documented formula (Base touchscreen calibration time = touchscreen calibration time workload รท touchscreen calibration time completion rate) to the inputs above produces each figure below.
  • At this operating point the engine returns 11.2 hr for required touchscreen calibration time, the number this scenario is built around.
  • At this operating point the engine returns 10 hr for base touchscreen calibration time.
  • At this operating point the engine returns 12 % for touchscreen calibration time allowance applied.
  • At this operating point the engine returns 12 pieces / min for touchscreen calibration time completion rate.

How this compares with the baseline

  • Against the tool's baseline example, where setup, retest, and handling allowance sits at 10% and the headline result is 11 hr, this scenario comes in 1.82% above the baseline at 11.2 hr.
  • Use it when scheduling a touchscreen batch, sizing calibration staffing, or checking whether the calibration cell can keep pace with final assembly. Treat this as a target state: the delta against the baseline quantifies what the improvement is worth before you commit to chasing it.

Results at a glance

  • Required touchscreen calibration time: 11.2 hr (headline result)
  • Base touchscreen calibration time: 10 hr
  • Touchscreen calibration time allowance applied: 12 %
  • Touchscreen calibration time completion rate: 12 pieces / min

Run it with your numbers

  • Every input above is editable in the live Touchscreen Calibration Time calculator, which recalculates instantly and can be shared with the inputs intact.

Last reviewed 2026-05-12.