Veterinary Device & Animal Health Products worked example

Dose Delivery Accuracy at 68% target dose accuracy rate: a worked example

This worked example runs the dose delivery accuracy numbers for a tougher week than the baseline: 68% target dose accuracy rate instead of the typical 95%. Estimate dose delivery accuracy for veterinary device and animal health products using production-ready inputs so teams can track KPI performance and decide whether corrective action is needed.

The inputs for this scenario

  • Doses delivered within tolerance: 8 count (held at the documented default)
  • Total doses tested: 250 count (held at the documented default)
  • Target dose accuracy rate: 68 % (the input this scenario stresses; the baseline uses 95)

Working through the calculation

  • The calculation starts from the formula this tool documents: Dose delivery accuracy rate = dose delivery accuracy count ÷ total dose delivery accuracy population × 100.
  • Dose delivery accuracy rate works out to 3.2 % at these inputs, and this is the headline figure for the scenario.
  • Dose delivery accuracy gap to target works out to 64.8 points at these inputs.
  • Dose delivery accuracy count works out to 8 count at these inputs.
  • Total dose delivery accuracy population works out to 250 count at these inputs.

How this compares with the baseline

  • Against the tool's baseline example, where target dose accuracy rate sits at 95% and the headline result is 3.2 %, this scenario lands almost exactly on the baseline at 3.2 %.
  • Use it during design verification, calibration checks, incoming-device QC, or when investigating a dosing complaint from the field. A result at this level usually justifies acting on the stressed input before touching anything else, because every other figure in the table is downstream of it.

Results at a glance

  • Dose delivery accuracy rate: 3.2 % (headline result)
  • Dose delivery accuracy gap to target: 64.8 points
  • Dose delivery accuracy count: 8 count
  • Total dose delivery accuracy population: 250 count

Run it with your numbers

  • To rerun this with your own numbers, open the live Dose Delivery Accuracy calculator, set target dose accuracy rate to your actual value, and adjust the remaining inputs to match your operation.

Last reviewed 2026-05-12.