Veterinary Device & Animal Health Products worked example

Regulatory Review Load with connected electrical load of review-lab equipment of 30 kW: a worked example

What does the result look like when connected electrical load of review-lab equipment reaches 30 kW? The full calculation is worked below with real intermediate numbers. Use it when regulatory review load in veterinary device and animal health products is up for an upgrade and you want a defensible savings story.

The inputs for this scenario

  • Connected electrical load of review-lab equipment: 30 kW (raised for this scenario; the documented default is 12)
  • Equipment runtime for the review batch: 8 hr (unchanged)
  • Blended electricity rate: 0.12 $ / kWh (unchanged)
  • Units cleared during the runtime: 1,000 units (unchanged)

Working through the calculation

  • Applying the documented formula (Total regulatory review load energy cost = regulatory review load connected load × regulatory review load runtime × blended electricity rate) to the inputs above produces each figure below.
  • At this operating point the engine returns 240 kWh for regulatory review load energy used, the number this scenario is built around.
  • At this operating point the engine returns 28.8 $ for total regulatory review load energy cost.
  • At this operating point the engine returns 0.03 $ / piece for energy cost per kwh.
  • At this operating point the engine returns 3.6 $ / hr for hourly regulatory review load energy cost.

How this compares with the baseline

  • Against the tool's baseline example, where connected electrical load of review-lab equipment sits at 12 kW and the headline result is 96 kWh, this scenario comes in 150% above the baseline at 240 kWh.
  • A figure at this level is achievable when connected electrical load of review-lab equipment is genuinely sustained, not just peaked for a shift. It uses nameplate connected load, so real draw — which varies with duty cycle and idling — may be lower than the calculated figure.

Results at a glance

  • Regulatory review load energy used: 240 kWh (headline result)
  • Total regulatory review load energy cost: 28.8 $
  • Energy cost per kWh: 0.03 $ / piece
  • Hourly regulatory review load energy cost: 3.6 $ / hr

Run it with your numbers

  • Every input above is editable in the live Regulatory Review Load calculator, which recalculates instantly and can be shared with the inputs intact.

Last reviewed 2026-05-12.