Veterinary Device & Animal Health Products worked example

Regulatory Review Load with connected electrical load of review-lab equipment of 6 kW: a worked example

Here is what the math looks like when conditions slip. We hold every other input steady and drop connected electrical load of review-lab equipment to 6 kW, then walk the calculation through step by step. Estimate regulatory review load for veterinary device and animal health products using production-ready inputs so teams can budget energy cost, compare equipment settings, or include electricity in the quote.

The inputs for this scenario

  • Connected electrical load of review-lab equipment: 6 kW (the input this scenario stresses; the baseline uses 12)
  • Equipment runtime for the review batch: 8 hr (held at the documented default)
  • Blended electricity rate: 0.12 $ / kWh (held at the documented default)
  • Units cleared during the runtime: 1,000 units (held at the documented default)

Working through the calculation

  • The calculation starts from the formula this tool documents: Total regulatory review load energy cost = regulatory review load connected load × regulatory review load runtime × blended electricity rate.
  • Regulatory review load energy used works out to 48 kWh at these inputs, and this is the headline figure for the scenario.
  • Total regulatory review load energy cost works out to 5.76 $ at these inputs.
  • Energy cost per kWh works out to 0.01 $ / piece at these inputs.
  • Hourly regulatory review load energy cost works out to 0.72 $ / hr at these inputs.

How this compares with the baseline

  • Against the tool's baseline example, where connected electrical load of review-lab equipment sits at 12 kW and the headline result is 96 kWh, this scenario comes in 50% below the baseline at 48 kWh.
  • The practical read: the gap between this scenario and the baseline is entirely attributable to connected electrical load of review-lab equipment, so recovering it is worth quantifying in dollars before considering equipment or staffing changes. It uses nameplate connected load, so real draw — which varies with duty cycle and idling — may be lower than the calculated figure.

Results at a glance

  • Regulatory review load energy used: 48 kWh (headline result)
  • Total regulatory review load energy cost: 5.76 $
  • Energy cost per kWh: 0.01 $ / piece
  • Hourly regulatory review load energy cost: 0.72 $ / hr

Run it with your numbers

  • To rerun this with your own numbers, open the live Regulatory Review Load calculator, set connected electrical load of review-lab equipment to your actual value, and adjust the remaining inputs to match your operation.

Last reviewed 2026-05-12.