Wire Harness, Cable & Electromechanical Assembly worked example

BOM Kit Accuracy at 68% target kit accuracy rate: a worked example

Suppose target kit accuracy rate falls to 68%. This page works the full calculation at that level so you can see exactly which result moves and by how much. Estimate bom kit accuracy for wire harness, cable and electromechanical assembly using production-ready inputs so teams can track KPI performance and decide whether corrective action is needed.

The inputs for this scenario

  • Kits pulled with a BOM error: 8 count (held at the documented default)
  • Total kits pulled and audited: 250 count (held at the documented default)
  • Target kit accuracy rate: 68 % (the input this scenario stresses; the baseline uses 95)

Working through the calculation

  • The calculation starts from the formula this tool documents: Bom kit accuracy rate = bom kit accuracy count ÷ total bom kit accuracy population × 100.
  • Bom kit accuracy rate works out to 3.2 % at these inputs, and this is the headline figure for the scenario.
  • Bom kit accuracy gap to target works out to 64.8 points at these inputs.
  • Bom kit accuracy count works out to 8 count at these inputs.
  • Total bom kit accuracy population works out to 250 count at these inputs.

How this compares with the baseline

  • Against the tool's baseline example, where target kit accuracy rate sits at 95% and the headline result is 3.2 %, this scenario lands almost exactly on the baseline at 3.2 %.
  • It computes the percentage of kits that met the BOM exactly and the gap in percentage points between that rate and your target. When the numbers land here, the stressed input is the lever to work; the walkthrough above shows exactly how much each output recovers as it climbs back toward the baseline.

Results at a glance

  • Bom kit accuracy rate: 3.2 % (headline result)
  • Bom kit accuracy gap to target: 64.8 points
  • Bom kit accuracy count: 8 count
  • Total bom kit accuracy population: 250 count

Run it with your numbers

  • To rerun this with your own numbers, open the live BOM Kit Accuracy calculator, set target kit accuracy rate to your actual value, and adjust the remaining inputs to match your operation.

Last reviewed 2026-05-12.