Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel

Every line of heading 7228

• 7228 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel.
• 7228.10.00 Bars and rods, of high-speed steel: General Free; Special none; Column 2 32%.
• 7228.10.00.10 Not cold-formed (under: Bars and rods, of high-speed steel) (kg).
• 7228.10.00.30 With a maximum cross-sectional dimension of less than 18 mm (kg).
• 7228.10.00.60 With a maximum cross-sectional dimension of 18 mm or more (kg).
• 7228.20 Bars and rods, of silico-manganese steel.
• 7228.20.10.00 Not cold-formed (under: Bars and rods, of silico-manganese steel) (kg): General Free; Special none; Column 2 28%.
• 7228.20.50.00 Cold-formed (under: Bars and rods, of silico-manganese steel) (kg): General Free; Special none; Column 2 28%.
• 7228.30 Of tool steel (other than high-speed steel).
• 7228.30.20.00 Of ball-bearing steel (under: Of tool steel (other than high-speed steel)) (kg): General Free; Special none; Column 2 29%.
• 7228.30.40.00 Of chipper knife steel, not cold-formed (kg): General Free; Special none; Column 2 28%.
• 7228.30.60.00 Other (under: Of tool steel (other than high-speed steel)) (kg): General Free; Special none; Column 2 29%.
• 7228.30.80 Other (under: Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded): General Free; Special none; Column 2 28%.
• 7228.30.80.05 Of high-nickel alloy steel (under: Other) (kg).
• 7228.30.80.10 Concrete reinforcing bars and rods (kg).
• 7228.30.80.15 With a diameter or cross section measuring less than 76 mm (kg).
• 7228.30.80.41 With a diameter or cross section measuring 76 mm or more but not exceeding 152 mm (kg).
• 7228.30.80.45 With a diameter or cross section measuring 152 mm or more but not exceeding 228 mm (kg).
• 7228.30.80.70 With a diameter or cross section exceeding 228 mm (kg).
• 7228.40.00.00 Other bars and rods, not further worked than forged (kg): General Free; Special none; Column 2 28%.
• 7228.50 Other bars and rods, not further worked than cold-formed or cold-finished.
• 7228.50.10 Of tool steel (other than high-speed steel): General Free; Special none; Column 2 29%.
• 7228.50.10.10 Of ball-bearing steel (under: Of tool steel (other than high-speed steel)) (kg).
• 7228.50.10.20 Of round or rectangular cross section with surfaces ground, milled or polished (kg).
• 7228.50.10.40 Other (under: With a maximum cross-sectional dimension of less than 18 mm) (kg).
• 7228.50.10.60 Of round or rectangular cross section with surfaces ground, milled or polished (kg).
• 7228.50.10.80 Other (under: With a maximum cross-sectional dimension of 18 mm or more) (kg).
• 7228.50.50 Other (under: Other bars and rods, not further worked than cold-formed or cold-finished): General Free; Special none; Column 2 28%.
• 7228.50.50.05 Of high-nickel alloy steel (under: Other) (kg).
• 7228.50.50.15 With a diameter or cross section measuring less than 76 mm (kg).
• 7228.50.50.40 With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm (kg).
• 7228.50.50.70 With a diameter or cross section exceeding 228 mm (kg).
• 7228.60 Other bars and rods (under: Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel).
• 7228.60.10 Of tool steel (other than high-speed steel): General Free; Special none; Column 2 29%.
• 7228.60.10.30 Of ball-bearing steel (under: Of tool steel (other than high-speed steel)) (kg).
• 7228.60.10.60 Other (under: Of tool steel (other than high-speed steel)) (kg).
• 7228.60.60.00 Not cold-formed (under: Other) (kg): General Free; Special none; Column 2 28%.
• 7228.60.80.00 Cold-formed (under: Other) (kg): General Free; Special none; Column 2 28%.
• 7228.70 Angles, shapes and sections (under: Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel).
• 7228.70.30 Hot-rolled, not drilled, not punched and not otherwise advanced: General Free; Special none; Column 2 10%.
• 7228.70.30.10 U, I, H and T sections (under: Hot-rolled, not drilled, not punched and not otherwise advanced) (kg).
• 7228.70.30.20 Angles (under: With a maximum cross-sectional dimension of 76 mm or more) (kg).
• 7228.70.30.41 Other (under: With a maximum cross-sectional dimension of 76 mm or more) (kg).
• 7228.70.30.60 Angles (under: With a maximum cross-sectional dimension of less than 76 mm) (kg).
• 7228.70.30.81 Other (under: With a maximum cross-sectional dimension of less than 76 mm) (kg).
• 7228.70.60.00 Other (under: Angles, shapes and sections) (kg): General Free; Special none; Column 2 28%.
• 7228.80.00.00 Hollow drill bars and rods (under: Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel) (kg): General Free; Special none; Column 2 30%.

About these rates

The rates are those printed in the 2026 HTS Revision 23, published by the U.S. International Trade Commission. A 10-digit statistical line takes the rates printed on the 8-digit line above it. Chapter 99 duties (Section 232, Section 301, IEEPA) depend on the product, the origin and the date, are charged on top, and are not included. A code here is a strong lead, not a ruling: confirm it with a customs broker or a CBP binding ruling.